Signal Conditioners & Isolators

 DC - DC Transmitters

 

Download DC Input pdf
Model Input Output Power
API 2000 Series
DuoPak®

Two Channel Isolated Transmitter

Specify Input Type and Range for Each Channel
Factory Configured
Choose Any Two:
DC voltage or current
AC voltage or current
RTD
Frequency
Potentiometer
Strain Gauge
See data sheet for input specifications and model numbers
Specify Output Range for Each Channel
Factory Configured
0-1 V,
0-5 V,
1-5 V,
0-10 V
±5 V,
±10 V
0-1 mA,
0-20 mA,
4-20 mA
Others available
Two Independent Channels
I/O LoopTracker LEDs
Output Test Buttons
Full I/O/Power Isolation
Removable Plugs
DIN Rail or Surface Mount
55 mm Wide
80-265 VAC, 48-300 VDC Power
API 20xx DD for 9-30 VDC,
10-32 VAC Power (+$60)
API 4010 G
DC-DC Transmitter, Non-Isolated
DC Voltage or Current
Specify Range
18V Loop Supply
DC Voltage or Current
Specify Range
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4050 G
DC-DC Transmitter, Non-Isolated
Narrow Input Span
DC Voltage or Current
Specify Range
Narrow Input Span
18V Loop Supply
DC Voltage or Current
Specify Range
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
APD 4300
APD 4300 PLC
Factory Ranged
Isolated DC-DC Transmitter
with I/O Loop Power Supplies
APD 4300 PLC is pre-configured
for 4-20 mA I/O


Isolate Single-Ended Inputs,
Eliminate PLC/DCS Ground Loops
Isolate and Correct Sink-Sink o
r Source-Source Mismatches
Use with Allen Bradley, GE/Fanuc,
IDEC, Omron, Mitsubishi, Modicon,
Siemens, Panasonic,
Honeywell Analog Inputs
Removable Plugs!

Specify Input Range
Factory Configured
0-100 mVDC to
0-100 VDC
±100 mVDC to ±10 VDC
0-1 mADC to
0-900 mADC
4-20 mA Input
Others available

Milliamp input can be field wired for sink or source
Specify Output Range
Factory Configured
0-1 V to ±10 VDC,
0-1 mA to 4-20 mA,
up to 20 VDC with M09 option,
4-20 mA Output
Others available

Milliamp output can be field wired for sink or source
Removable Plugs
I/O LoopTracker LEDs
Output Test Button
Output Test Terminals for
Manual Override Capability
Full I/O/Power Isolation
Selectable I/O Sink/Source
15 V Input Loop Power Supply
20 V Output Loop Power Supply
80-265 VAC, 48-300 VDC Powered
D option for 9-30 VDC,
10-32 VAC Power
API 4300 G
DC-DC Transmitter, Isolated
DC Voltage or Current
Factory Set Range
18V Loop Supply
Fully Isolated
DC Voltage or Current
Specify Range
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4310 G
DC-DC Transmitter, Isolated
Narrow Input Span
DC Voltage or Current
Specify Range
Narrow Input Range
18V Loop Supply
Fully Isolated
DC Voltage or Current
Specify Range
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4380 G
DC-DC Transmitter, Isolated
Field Rangeable

4380 G Ranges

4380 G Help

DC Voltage or Current
Field Selectable Ranges
18V Loop Supply
Fully Isolated
C Voltage or Current
Field Selectable Ranges
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4380 GHV3
Hi Voltage DC-DC Transmitter,
Isolated
Field Rangeable

4380 GHV3 Ranges

DC Voltage or Current
Field Selectable Ranges
High Voltage Input to
200 VDC
18V Loop Supply
Fully Isolated
DC Voltage or Current
Field Selectable Ranges
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4380 DIN
DC-DC Transmitter, Isolated
Field Rangeable

4380 DIN Help
DC Voltage or Current
Field Selectable Ranges
12V Loop Supply
Fully Isolated
DC Voltage or Current
Field Selectable Ranges
80-265 VAC
48-300 VDC
API 4380 DD
DC-DC Transmitter, Isolated
Field Rangeable

4380 DIN Help
DC Voltage or Current
Field Selectable Ranges
12V Loop Supply
Fully Isolated
DC Voltage or Current
Field Selectable Ranges
9-30 VDC
APD 4380
Field Selectable Minuteman Setup
Isolated DC-DC Transmitter
Removable Plugs!
53 Field Configurable Input Ranges
0-10 mVDC to 0-50 VDC
±10 mV to ±10 VDC
0-200 µA to 0-50 mADC
Others available

 

18 Field Configurable Output Ranges
0-1 V to ±10 V
0-2 mA to 0-20 mA
4-20 mA
Others available

 

Minuteman One-Minute Setup
Removable Plugs
I/O LoopTracker LEDs
Output Test Button
Full I/O/Power Isolation
Selectable I/O Sink/Source
15 V Input Loop Power Supply
20 V Output Loop Power Supply
80-265 VAC, 48-300 VDC Powered
D option for 9-30 VDC,
10-32 VAC Power
API 4385 G
DC-DC Transmitter, Isolated
Field Rangeable

4385 G Ranges

DC Voltage or Current
Field Selectable Ranges
True Offset
Non-Interacting Controls
18V Loop Supply
Fully Isolated
DC Voltage or Current
Field Selectable Ranges
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
APD HV-DC
Fast Field Selectable Setup
Isolated DC-DC Transmitter for High Voltage DC Inputs
Removable Plugs!
8 Field Configurable Input Ranges
7 standard plus 1 factory set custom range (specify if required)
0-100 VDC,
0-200 VDC,
0-300 VDC,
0-400 VDC,
0-500 VDC,
0-1000 VDC,
0-1200 VDC, custom
18 Field Configurable Output Ranges
0-1 V, 0-2 V, 0-4 V,
1-5 V, 0-5 V, 0-8 V,
2-10 V, 0-10 V,
±5 V, ±10 V,
0-2 mA, 0-4 mA,
0-8 mA, 2-10 mA,
0-10 mA, 0-16 mA,
4-20 mA, 0-20 mA
I/O LoopTracker LEDs
Output Test Button
Full I/O/Power Isolation
DIN rail mount
22.5 mm Wide
80-265 VAC or 48-300
VDC Powered
APD HV-DC D for 9-30 VDC
/ 10-32 VAC Power
DPI HV-DC
Hi Voltage DC-DC Transmitter,
Isolated
Field Rangeable

DPI HV-DC Ranges
High Voltage DC
0-100VDC to 0-1200VDC
Fully Isolated
DC Voltage or Current
Field Selectable Ranges
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC

API 4390
2 Channel DC-DC Transmitter,
Isolated

DC Volts or mA
2 Independent Channels
Fully Isolated
DC Voltage or Current
2 Independent Channels
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VAC/VDC
API 4391
2 Channel DC-DC Transmitter,
Isolated, Bipolar Output
DC Volts or mA
2 Independent Channels
Fully Isolated
Bipolar 5 Volts or 10 Volts
2 Independent Channels
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VAC/VDC
API 4392
2 Channel DC-DC Transmitter,
Isolated, Bipolar Input & Output
Bipolar DC Volts or mA
2 Independent Channels
Fully Isolated
Bipolar DC Volts or mA
2 Independent Channels
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VAC/VDC
API 4393
IsoSplitter

DC-DC Signal Splitter,
Isolated
One DC Voltage or Current Fully Isolated
Two Independent
DC Voltage or
Current Channels
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VAC/VDC
API 4393 L1
IsoSplitter™

DC-DC Signal Splitter,
Isolated
Sourced Input,
Source or Sink Outputs
One 4-20 mA
18V Loop Power Supply
Fully Isolated
Two Independent
4-20 mA Channels
Source or Sink Outputs
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VAC/VDC
API 4393 DIN
IsoSplitter

DC-DC Signal Isolator-Splitter
Sink-Source-Source

Specify Input Range
Factory Configured
0-50mVDC to ±10VDC
0-1mADC to
0-20mADC,
4-20mADC
Current Inputs are Sinking
Others available
Specify Output Ranges
Factory Configured
2 Independent Channels
0-50mVDC to ±10VDC
0-1mADC to
0-20mADC,
4-20mADC
Current Outputs use 15V Source for each Channel
Others available
Removable Plugs
I/O Loop Tracker LEDs
Output Test Button
Full I/O/Power Isolation
DIN Rail or Surface Mount
55 mm Wide
115 VAC Powered
A230 option for 230 VAC Power
D option for 9-30 VDC Power (+$60)
API 4393 DIN EX1
IsoSplitter

4-20 mA Signal Isolator-Splitter
Sink-Sink-Source

Factory Configured
One 4-20 mA Sinking Input
Factory Configured
2 Independent Channels
Ch.1: 4-20 mA, Current Sinking
Ch.2: Specify Output Range
Removable Plugs
I/O Loop Tracker LEDs
Output Test Button
Full I/O/Power Isolation
DIN Rail or Surface Mount
55 mm Wide
115 VAC Powered
A230 option for 230 VAC Power
D option for 9-30 VDC Power (+$60)
API 4393 DIN EX2
IsoSplitter

4-20 mA Signal Isolator-Splitter
Sink-Source-Sink

Factory Configured
One 4-20 mA Sinking Input
Factory Configured
2 Independent Channels
Ch.1: 4-20 mA, 15 V Source
Ch.2: 4-20 mA, Current Sinking
Removable Plugs
I/O Loop Tracker LEDs
Output Test Button
Full I/O/Power Isolation
DIN Rail or Surface Mount
55 mm Wide
115 VAC Powered
A230 option for 230 VAC Power
D option for 9-30 VDC Power (+$60)
API 4393 DIN EX3
IsoSplitter

4-20 mA Signal Isolator-Splitter
Sink-Sink-Sink

Factory Configured
One 4-20 mA Sinking Input
Factory Configured
2 Independent Channels
Ch.1: 4-20 mA, Current Sinking
Ch.2: 4-20 mA, Current Sinking
Removable Plugs
I/O Loop Tracker LEDs
Output Test Button
Full I/O/Power Isolation
DIN Rail or Surface Mount
55 mm Wide
115 VAC Powered
A230 option for 230 VAC Power
D option for 9-30 VDC Power (+$60)
API 4393 DIN L1
IsoSplitter

4-20 mA Signal Isolator-Splitter
Source-Source-Source

Factory Configured
One 4-20 mA Sinking Input
Factory Configured
2 Independent Channels
Ch.1: Specify Output Range
Ch.2: Specify Output Range
Removable Plugs
I/O Loop Tracker LEDs
Output Test Button
Full I/O/Power Isolation
DIN Rail or Surface Mount
55 mm Wide
115 VAC Powered
A230 option for 230 VAC Power
D option for 9-30 VDC Power (+$60)
API 4393 DIN L1 EX1
IsoSplitter

4-20 mA Signal Isolator-Splitter
Source-Sink-Source

Factory Configured
One 4-20 mA Sinking Input
Factory Configured
2 Independent Channels
Ch.1: 4-20 mA, Current Sinking
Ch.2: Specify Output Range
Removable Plugs
I/O Loop Tracker LEDs
Output Test Button
Full I/O/Power Isolation
DIN Rail or Surface Mount
55 mm Wide
115 VAC Powered
A230 option for 230 VAC Power
D option for 9-30 VDC Power (+$60)
API 4393 DIN L1 EX2
IsoSplitter

4-20 mA Signal Isolator-Splitter
Source-Source-Sink

Factory Configured
One 4-20 mA Sinking Input
Factory Configured
2 Independent Channels
Ch.1: Specify Output Range
Ch.2: 4-20 mA, Current Sinking
Removable Plugs
I/O Loop Tracker LEDs
Output Test Button
Full I/O/Power Isolation
DIN Rail or Surface Mount
55 mm Wide
115 VAC Powered
A230 option for 230 VAC Power
D option for 9-30 VDC Power (+$60)
API 4393 DIN L1 EX3
IsoSplitter

4-20 mA Signal Isolator-Splitter
Source-Sink-Sink

Factory Configured
One 4-20 mA Sinking Input
Factory Configured
2 Independent Channels
Ch.1: 4-20 mA, Current Sinking
Ch.2: 4-20 mA, Current Sinking
Removable Plugs
I/O Loop Tracker LEDs
Output Test Button
Full I/O/Power Isolation
DIN Rail or Surface Mount
55 mm Wide
115 VAC Powered
A230 option for 230 VAC Power
D option for 9-30 VDC Power (+$60)

 Loop-Powered Isolators

 

Download DC Input pdf
Model Input Output Power
API LPI-1
Loop-Powered Isolator
4-20 mA Fully Isolated
4-20 mA
Loop Powered
API LPI-2
Dual Channel
Loop-Powered Isolator
Two 4-20 mA Fully Isolated
Two 4-20 mA
Loop Powered
DPI-2
Dual Channel
Loop-Powered Isolator
Two 4-20 mA Fully Isolated
Two 4-20 mA
Loop Powered
Sineax DCM 817-4
Loop-Powered Isolator



Sineax DCM 817-5
PCB Mount Isolator 90° Pins


0-20 mA, 4-20 mA 0-20 mA, 4-20 mA 500 V Isolation
Circuit Board Mounted
Straight Pins or 90° Pins
Loop-Powered Passive Device
600 O Maximum Burden
Compact and Cost Effective
OEM Solution
Specifications
Sineax TI816
PCB Mount Isolator
Straight Pins



Sineax TI816
Loop-Powered Isolator
Voltage Output
0-20 mA, 4-20 mA 0-10 V to 2-10 V 500 V Isolation
Loop-Powered Passive Device
Order with V or mA Output
600 O Maximum Burden (Current)
500 O Maximum Burden (Voltage)
Only 0.5" (12.5 mm) Wide
Low Cost
Specifications
Instructions
Sineax SI 815
Loop-Powered Isolator

4-20 mA 4-20 mA
2300 V Isolation
Single and Two Channel Versions
Output Loop Powered (12-30 V)
Transfers Power to Input Loop
Optional HART Protocol
Specifications
Instructions
Sineax SI 815
2 Channel Loop-Powered Isolator

4-20 mA 4-20 mA
2300 V Isolation
Single and Two Channel Versions
Output Loop Powered (12-30 V)
Transfers Power to Input Loop
Optional HART Protocol
Specifications
Instructions
Sineax TI 807-5
Loop-Powered Isolator, 1 Channel

0-20 mA, 4-20 mA 0-20 mA, 4-20 mA
Up to 4000 V Isolation
Loop-Powered Passive Device
One, Two, or Three Channel Versions
1000 O Maximum Burden
Specifications
Instructions
Sineax TI 807-112
Loop-Powered Isolator
2 Channel



Sineax TI 807-113
Loop-Powered Isolator
3 Channel

0-20 mA, 4-20 mA 0-20 mA, 4-20 mA Up to 4000 V Isolation
Loop-Powered Passive Device
One, Two, or Three Channel Versions
1000 O Maximum Burden
Specifications
Instructions

  Loop Power Supplies  

 
Model Input Output Power
API 9046
Regulated DC Power Supplies

115 VAC Std.
Opt. 230 VAC

Specify Output Voltage
Factory Configured
Others available
9046-05 0-5V 250mA
9046-06 0-6V 200mA
9046-09 0-9V 150mA
9046-10 0-10V 140mA
9046-12 0-12V 125mA
9046-15 0-15V 100mA
9046-18 0-18V 85mA
9046-24 0-24V 75mA
9046-28 0-28V 60mA
9046-32 0-32V 50mA
Hot-Swappable Plug-In Design
Lifetime Warranty
Power LED
Regulated Output
Output Fine Adjustment
Uses API-008 8-Pin Socket
Specify Power,
115 VAC or 230 VAC
API 9046 CH
Regulated Bipolar DC Power Supplies

115 VAC Std.
Opt. 230 VAC

Specify Output Voltage
Factory Configured
Others available
9046 CH-05 ±5V 125mA
9046 CH-06 ±6V 100mA
9046 CH-12 ±12V 60mA
9046 CH-15 ±15V 50mA
Hot-Swappable Plug-In Design
Lifetime Warranty
Power LED
Regulated Output
Uses API-008 8-Pin Socket
Specify Power; 115VAC or 230VAC
Sineax B 812

Loop Power Supply with I/O Isolation
and Hart


Factory configured for
60-265 VAC or VDC power

 

Input side; 4-20 mA,
18 to 25.5 VDC
Source resistance
330 Ω

Output side; 4-20 mA,
17 VDC no load
Permitted load:
750 Ω
, 550 Ω with HART
3.6 kV Input, Output, and Power
Isolation
Red LED for Open and Short
Circuit Fault Detection
Designed for HART Protocol
Specify Power, 60-265 VAC/VDC
or 20-70 VAC/VDC

Specifications
Instructions
Sineax B 812

Loop Power Supply with I/O Isolation
and Hart


Factory configured for
20-70 VAC or VDC power

 

Input side; 4-20 mA,
18 to 25.5 VDC
Source resistance
330 Ω

Output side; 4-20 mA,
17 VDC no load
Permitted load:
750 Ω
, 550 Ω with HART
3.6 kV Input, Output, and Powe
r Isolation
Red LED for Open and Short
Circuit Fault Detection
Designed for HART Protocol
Specify Power, 60-265 VAC/VDC
or 20-70 VAC/VDC

Specifications
Instructions
Sineax B 840

4 Channel Loop Power Supply

Factory configured for
24 VAC,
115 VAC, or 230 VAC power
4-20 mA, 24 VDC
4 Independent 4-20 mA Loops
4-Channel 4-20 mA, 24V DC Versions
LED Monitor for Each Channel
Each Channel Isolated
30 mA Current Limiter for Each Channel
Specify Power, 24 VAC, 115 VAC, or 230 VAC
Specifications
Instructions

 Thermocouple Input

Download Temperature Input pdf
Model Input Output Power
API 1200 G
T/C Input DPDT Alarm
J, K, T, E Thermocouple
Specify Type & Range
1 DPDT Contact Set
Field Adjustable
Specify Alarm Type
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 1220 G
T/C Input Dual SPDT Alarms

J, K, T, E Thermocouple
Specify Type & Range
2 SPDT Contact Sets
Field Adjustable
Specify Alarm Types
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
Sineax V624

Programmable
Isolated RTD or
T/C to DC Transmitter
Microprocessor Based


RTD
2-, 3-, or 4-wire
100
Ω 0.00385a
100
Ω 0.003916a

T/C types
J, K, T, E, R, S, N, B, W5, W3, L, U

Thermistor

Custom
Specify if Current or Voltage
Output
0-2 mA to
0-20 mA,
20-0 mA
0-1 V to
0-10 V,
10-0 V

PC Programmable
Reverse Output Programmable
Custom Input Linearization
Programmable Sensor Fault Response
Removable Plugs
3.7 kV Input/Output/Power Isolation
24-60 or 85-230 VAC/VDC Powered
Software
Instructions
API 4000 G
T/C or RTD Input Transmitter, Isolated
Field Rangeable

Note: This model discontinued and replaced by Camille Bauer V624
J, K, T, E, R, S Thermocouple
Most  RTDs &
Resistance Elements
Field Selectable Type &  Range

Fully Isolated
DC Voltage or Current
Field Selectable Ranges

115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC

API 4100 G
T/C Input Transmitter,
Non-Isolated, Non-Linearized
J, K, T, E Thermocouple
Specify Type & Range

DC Voltage or Current
Field Selectable Ranges

115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC

API 4130 GL
T/C Input Transmitter,
Isolated, Linearized

J, K, T, E Thermocouple
Specify Type & Range

Fully Isolated
DC Voltage or Current
Field Selectable Ranges

115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC

  RTD Input 

Download Temperature Input pdf
Model Input Output Power
Sineax V624

Programmable
Isolated RTD or
T/C to DC Transmitter
Microprocessor Based


RTD
2-, 3-, or 4-wire
100
Ω 0.00385a
100
Ω 0.003916a

T/C types
J, K, T, E, R, S, N, B, W5, W3, L, U

Thermistor

Custom
Specify if Current or Voltage
Output
0-2 mA to
0-20 mA,
20-0 mA
0-1 V to
0-10 V,
10-0 V

PC Programmable
Reverse Output Programmable
Custom Input Linearization
Programmable Sensor Fault Response
Removable Plugs
3.7 kV Input/Output/Power Isolation
24-60 or 85-230 VAC/VDC Powered
Software
Instructions
APD 1400

RTD Input Single Alarm Trip

Specify RTD type and Temperature Range
Factory Configured
10
Ω to 2000 Ω RTD including
100
Ω 0.00385a
100
Ω 0.00391a,
10
Ω Cu,
1000
Ω Ni-Fe,
120
Ω Ni or Special
Single setpoint dual SPDT Form C 8A contact set
Field Adjustable
Specify Alarm Type
Standard: HI alarm, non-latching, normal acting
Options: LO alarm, latching, reverse acting
See data sheet for alarm options

DIN Rail Mount without Tools
LoopTracker LED for Input
Alarm Status LEDs
Push to Test/Reset
2-Wire or 3-Wire RTD
Lead Wire Compensation for 3-Wire
Universal Power
D option for 9-30 VDC, 10-32 VAC Power
APD 1420

RTD Input Dual Alarm Trip

Specify RTD type and Temperature Range
Factory Configured
10
Ω to 2000 Ω RTD including
100
Ω 0.00385a
100
Ω 0.00391a,
10
Ω Cu,
1000
Ω Ni-Fe,
120
Ω Ni or Special
Two setpoint dual SPDT Form C 8A contact sets
Field Adjustable
Specify Alarm Type
Standard: HI/LO alarm, non-latching, normal acting
Options: LO/LO, HI/HI, LO/HI alarms, latching, reverse acting
See data sheet for alarm options

DIN Rail Mount without Tools
LoopTracker LED for Input
Alarm Status LEDs
Push to Test/Reset
2-Wire or 3-Wire RTD
Lead Wire Compensation for 3-Wire
Universal Power
D option for 9-30 VDC, 10-32 VAC Power
APD 1430

RTD Input Band Alarm Trip

Specify RTD type and Temperature Range
Factory Configured
10
Ω to 2000 Ω RTD including
100
Ω 0.00385a
100
Ω 0.00391a,
10
Ω Cu,
1000
Ω Ni-Fe,
120
Ω Ni or Special
Two setpoint dual SPDT Form C 8A contact sets
Field Adjustable
Specify Alarm Options
Standard: Band alarm (both alarms trip if outside LO and HI
trip points), non-latching, normal acting
Options: Inverse band alarm, latching, reverse acting
See data sheet for alarm options

DIN Rail Mount without Tools
LoopTracker LED for Input
Alarm Status LEDs
Push to Test/Reset
2-Wire or 3-Wire RTD
Lead Wire Compensation for 3-Wire
Universal Power
D option for 9-30 VDC, 10-32 VAC Power
API 1400 G
RTD Input DPDT Alarm
10 Ω to 2000 Ω RTDs
Factory Set Type & Range
1 DPDT Contact Set
Field Adjustable
Specify Alarm Type
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 1420 G
RTD Input Dual SPDT Alarms
10 Ω to 2000 Ω RTDs
Specify Type & Range
2 SPDT Contact Sets
Field Adjustable
Specify Alarm Types
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4000 G
T/C or RTD Input Transmitter, Isolated
Field Rangeable

Note: This model discontinued and replaced by Sineax V624
Most  RTDs &
Resistance Elements
J, K, T, E, R, S Thermocouple
Field Selectable Type &  Range
Fully Isolated
DC Voltage or Current
Field Selectable Ranges
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4001 G
RTD Input Transmitter, Non-Isolated,
Non-Linearized
10 Ω to 2000 Ω RTDs
Specify Type & Range
DC Voltage or Current
Specify Range
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4001 GL
RTD Input Transmitter, Isolated,
Linearized
10 Ω to 2000 Ω RTDs
Specify Type & Range
Fully Isolated
DC Voltage or Current
Specify Range
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4001 G SA-B
Differential 2 RTD Input Transmitter,
Non-Isolated,
Non-Linearized
Two 100 Ω 0.00385 RTDs
For Differential Temperature
Factory Set,
Can Be Field Calibrated
DC Voltage or Current
Specify Range
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 2000 Series
DuoPak®

Two Channel Isolated Transmitter

 


Specify Input Type and Range for Each Channel
Factory Configured
Choose Any Two:
DC voltage or current
AC voltage or current
RTD
Frequency
Potentiometer
Load Cell/Strain Gauge
See data sheet for input specifications and model numbers

Specify Output Range for Each Channel
Factory Configured
0-1 V, 0-5 V,
1-5 V, 0-10 V
±5 V, ±10 V
0-1 mA, 0-20 mA, 4-20 mA
Others available

Two Independent Channels
I/O LoopTracker LEDs
Output Test Buttons
Full I/O/Power Isolation
Removable Plugs
DIN Rail or Surface Mount
55 mm Wide
80-265 VAC or 48-300 VDC Powered
API 20xx DD for 9-30 VDC/
10-32 VAC Power (+$60)
T16L Series
(F16LT)

ThermoPro®
Indicating RTD Transmitter

Specify RTD Length and Fixed or Spring-Loaded RTD
Temperature Range
–58.0°F to 392.0°F or
–50.0°C to 200.0°C
Selectable °F or °C
See data sheet for model numbers

4-20 mA Output is User Configurable Over the Temperature Range

User-Programmable 4-20 mA
Output Range
0.1 Degree Display Resolution
Precision RTD Element
NEMA 4X Housing
2-Wire Design
Powered by 8-32 VDC 4-20 mA
Current Loop
316 Stainless Steel Probe
1/2" NPT Fitting for Standard
Thermowells
Spring-Loaded Probe for use
with Thermowells
T16B Series
ThermoPro®
Battery Powered RTD
Temperature Indicator

Specify RTD Length and Fixed or Spring-Loaded RTD
Temperature Range
–58.0°F to 392.0°F or
–50.0°C to 200.0°C
Selectable °F or °C
See data sheet for model numbers

None

0.1 Degree Display Resolution
Precision RTD Element
NEMA 4X Housing
Powered by Two AA batteries (included)
316 Stainless Steel Probe
1/2" NPT Fitting for Standard Thermowells
Spring-Loaded Probe available for use with Thermowells
T16ADA Series
ThermoPro®
Battery Powered RTD
Temperature Indicator

Specify RTD Length and Fixed or Spring-Loaded RTD
Temperature Range
–58.0°F to 392.0°F or
–50.0°C to 200.0°C
Selectable °F or °C
See data sheet for model numbers

2 SPDT relays,
1 A @ 24 VDC,
0.5 A @ 115 VAC,
Non-inductive,
Fully programmable

User-Programmable Alarm Relays
0.1 Degree Display Resolution
Precision RTD Element
NEMA 4X Housing
Powered by 8-32 VDC, 10-32 VAC
316 Stainless Steel Probe
1/2" NPT Fitting for Standard Thermowells
Spring-Loaded Probe for use with Thermowells

  Frequency Modules

Click here to download Frequency pdf
Model Input Output Power
API 7010 G
Frequency to DC Transmitter, Isolated
10 Hz to 20 KHz
Specify Input Span

Fully Isolated
DC Voltage or Current
Specify Range

115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 7500 G
 DC to Frequency Transmitter, Isolated

7500 G Ranges
7500 G Help
DC Voltage or Current
Field Selectable Ranges
18V Loop Supply
Fully Isolated
0-100 Hz to 0-30 KHz
Field Selectable
Specify Open Col. or TTL
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 7500 G SS
DC to Low Frequency Transmitter, Isolated

7500 G SS Ranges
DC Voltage or Current
Field Selectable Ranges
18V Loop Supply
Fully Isolated
0-1 Hz to 0-300 Hz
Field Selectable
Specify Open Col. or TTL
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 7580 G
Frequency to DC Transmitter, Isolated
Field Rangeable

7580 G Ranges
7580 G Help
100 Hz to 30 KHz
Field Selectable Ranges
18V Loop Supply
Fully Isolated
DC Voltage or Current
Field Selectable Ranges
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC

  Frequency Modules

Download Frequency pdf
Model Input Output Power
APD 7580

Field Selectable Minuteman Setup

Frequency to DC Transmitter
Isolated

30 Field Configurable Inputs
Low Range
100 Hz Increments
Min: 0-100 Hz
Max: 0-1500 Hz
High Range
2 kHz Increments
Min: 2 kHz
Max: 30 kHz
18 Field Configurable Outputs
0-1 V to ±10 V
0-2 mA to 0-20 mA
4-20 mA

Accepts most frequency & prox sensors
Minuteman One-Minute Setup
Removable Plugs
I/O LoopTracker LEDs
Output Test Button
Full I/O/Power Isolation
Selectable Output Sink/Source
15 V Sensor Power Supply
20 V Output Loop Power Supply
80-265 VAC, 48-300 VDC Powered
D option for 9-30 VDC, 10-32 VAC Power
API 2000 Series
DuoPak®

Two Channel Isolated Transmitter

 


Specify Input Type and Range for Each Channel
Factory Configured
Choose Any Two:
DC voltage or current
AC voltage or current
RTD
Frequency
Potentiometer
Load Cell/Strain Gauge
See data sheet for input specifications and model numbers

Specify Output Range for Each Channel
Factory Configured
0-1 V, 0-5 V,
1-5 V, 0-10 V
±5 V, ±10 V
0-1 mA, 0-20 mA, 4-20 mA
Others available

Two Independent Channels
I/O LoopTracker LEDs
Output Test Buttons
Full I/O/Power Isolation
Removable Plugs
DIN Rail or Surface Mount
55 mm Wide
80-265 VAC or 48-300 VDC Powered
API 20xx DD for 9-30 VDC/
10-32 VAC Power (+$60)
API 1700 G
Frequency Input DPDT Alarm
10 Hz to 20 KHz
Specify Input Span
1 DPDT Contact Set
Field Adjustable
Specify Alarm Type
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 1720 G
Frequency Input Dual SPDT Alarms

10 Hz to 20 KHz
Specify Input Span
2 SPDT Contact Sets
Field Adjustable
Specify Alarm Type
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 7010 G
Frequency to DC Transmitter, Isolated

10 Hz to 20 KHz
Specify Input Span

Fully Isolated
DC Voltage or Current
Specify Range

115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 7500 G
 DC to Frequency Transmitter, Isolated

7500 G Ranges
7500 G Help

DC Voltage or Current
Field Selectable Ranges
18V Loop Supply
Fully Isolated
0-100 Hz to 0-30 KHz
Field Selectable
Specify Open Col. or TTL
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 7500 G SS
DC to Low Frequency Transmitter, Isolated

7500 G SS Ranges

DC Voltage or Current
Field Selectable Ranges
18V Loop Supply
Fully Isolated
0-1 Hz to 0-300 Hz
Field Selectable
Specify Open Col. or TTL
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 7580 G
Frequency to DC Transmitter, Isolated
Field Rangeable

7580 G Ranges
7580 G Help
100 Hz to 30 KHz
Field Selectable Ranges
18V Loop Supply
Fully Isolated
DC Voltage or Current
Field Selectable Ranges
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
RheinTacho Speed Monitors

CR
CRR
CRA
CRRA

Field Programmable
Isolated

Programmable
Min: 0-0.01 Hz
Max: 0-20,000 Hz
Optional Sensors:
Hall

Differential Hall

Magnetoresistive

See price list for standard sensors

CR: 1 Relay

CRR: 2 Relays

CRA: 1 Relay & Analog Output

CRRA 2 Relays & Analog Output

Relay:
5A @ 250 VAC resistive or
2A @ 42 VDC resistive

Analog Output:
0-20mA or 4-20mA

Field Programmable
DIN-rail mounted
Programmable Measuring Units
Programmable Relays
Programmable Delay and Reset
Full I/O/Power Isolation
18-36 VDC Powered
Instructions

  Potentiometer Input 

Download Potentiometer Input pdf
Model Input Output Power
API 2000 Series
DuoPak®

Two Channel Isolated Transmitter


Specify Input Type and Range for Each Channel
Factory Configured
Choose Any Two:
DC voltage or current
AC voltage or current
RTD
Frequency
Potentiometer
Load Cell/Strain Gauge
See data sheet for input specifications and model numbers

Specify Output Range for Each Channel
Factory Configured
0-1 V, 0-5 V,
1-5 V, 0-10 V
±5 V, ±10 V
0-1 mA, 0-20 mA, 4-20 mA
Others available

Two Independent Channels
I/O LoopTracker LEDs
Output Test Buttons
Full I/O/Power Isolation
Removable Plugs
DIN Rail or Surface Mount
55 mm Wide
80-265 VAC or 48-300 VDC Powered
API 20xx DD for 9-30 VDC/
10-32 VAC Power (+$60)
API 1800 G
Potentiometer Input DPDT Alarm
0-100 Ω to
0-1 Mega Ω
Potentiometer
1 DPDT Contact Set
Field Adjustable
Specify Alarm Type
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 1820 G
Potentiometer Input Dual SPDT Alarms
0-100 Ω to
0-1 Mega Ω
Potentiometer
2 SPDT Contact Sets
Field Adjustable
Specify Alarm Type
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4003 G
Potentiometer to DC Transmitter,
Non-Isolated

0-100 Ω to
0-1 Mega Ω
Potentiometer
DC Voltage or Current
Specify Range
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4003 G I
Potentiometer to DC Transmitter,
Isolated

0-100 Ω to
0-1 Mega Ω
Potentiometer
Fully Isolated
DC Voltage or Current
Specify Range
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4008 G
Potentiometer to DC Transmitter,
Isolated
Field Rangeable

0-100 Ω to
0-1 Mega Ω
Potentiometer
Fully Isolated
DC Voltage or Current
Field Selectable Ranges
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
APD 4008

Field Selectable Minuteman Setup

Isolated Potentiometer to DC Transmitter

Any Potentiometer
0-100 O to
0-1 Mega
Ω
0 to 90% Offset Capable
Can Use Partial Potentiometer Ranges
18 Field Configurable Outputs
0-1 V to ±10 V
0-2 mA to 0-20 mA
4-20 mA
Minuteman One-Minute Setup
Removable Plugs
I/O LoopTracker LEDs
Output Test Button
Full I/O/Power Isolation
Selectable Output Sink/Source
20 V Output Loop Power Supply
80-265 VAC, 48-300 VDC Powered
D option for 9-30 VDC, 10-32 VAC Power

 Strain Gauge, Bridge, Load Cell Input 

Download Strain Gauge Input pdf
Model Input Output Power
API 1500 G
Strain Gauge Input DPDT Alarm
Strain Gauge, Bridge,
Load Cell
Adjustable Excitation
Specify Input Span
1 DPDT Contact Set
Field Adjustable
Specify Alarm Type
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 1520 G
Strain Gauge Input Dual SPDT Alarms
2 SPDT Contact Sets
Field Adjustable
Specify Alarm Type
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4051 G
Single Strain Gauge to
DC Transmitter,
Non-Isolated

Strain Gauge, Bridge,
Load Cell
Adjustable Excitation
Specify Input Span
DC Voltage or Current
Specify Range
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4058 G
1-4 Strain Gauge to
DC Transmitter,
Non-Isolated

4058 G Ranges
4058 G Help
1 to 4 Strain Gauges,
Bridges, or Load Cells
Field Selectable Ranges
Adjustable Excitation

DC Voltage or Current
Field Selectable Ranges

115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4059 G
1-4 Strain Gauge to
DC Transmitter, Isolated

4059 G Help
4059 G Ranges
1 to 4 Strain Gauges,
Bridges, or Load Cells
Field Selectable Ranges
Adjustable Excitation

Fully Isolated
DC Voltage or Current
Field Selectable Ranges

115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
APD 4059

Field Selectable Minuteman Setup

Isolated Bridge to DC Transmitter
Isolated


Field Configurable
0-5 mVDC to
0-400 mVDC
Field Settable Excitation Voltage
0-10 VDC in 1 VDC Steps
18 Field Configurable Outputs
0-1 V to ±1 0V
0-2 mA to 0-2 0mA
4-20 mA
Minuteman One-Minute Setup
I/O LoopTracker LEDs
Full I/O/Power Isolation
Internal Bridge Excitation Source
Drive up to 4 bridges
Output Test Button
DIN rail mount
22.5 mm Wide
80-265 VAC, 48-300 VDC Powered
Option D for 9-30 VDC, 10-32 VAC Power
API 2000 Series
DuoPak®

Two Channel Isolated Transmitter

 


Specify Input Type and Range for Each Channel
Factory Configured
Choose Any Two:
DC voltage or current
AC voltage or current
RTD
Frequency
Potentiometer
Load Cell/Strain Gauge
See data sheet for input specifications and model numbers

Specify Output Range for Each Channel
Factory Configured
0-1 V, 0-5 V,
1-5 V, 0-10 V
±5 V, ±10 V
0-1 mA, 0-20 mA, 4-20 mA
Others available

Two Independent Channels
I/O LoopTracker LEDs
Output Test Buttons
Full I/O/Power Isolation
Removable Plugs
DIN Rail or Surface Mount
55 mm Wide
80-265 VAC or 48-300 VDC Powered
API 20xx DD for 9-30 VDC/
10-32 VAC Power (+$60)

API 4059 DIN
1-4 Strain Gauge to
DC Transmitter, Isolated

4059 DIN Ranges

1 to 4 Strain Gauges,
Bridges, or Load Cells
Field Selectable Ranges
Adjustable Excitation

Fully Isolated
DC Voltage or Current
Field Selectable Ranges

115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API SUM 000
Strain Gauge Summing Board
API SUM 025
Summing Board with API 4059
API SUM 100
Summing Board w. NEMA 4X Box
API SUM 125
Summing Board, API 4059, NEMA 4X Box
Summing Assembly Board
1 to 4 Strain Gauges,
Bridges, or Load Cells
Individually Adjustable
Excitation & Signal Trim
Optional SS Housing

DC Voltage or Current
Use with 4058 G or
4059 G

115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC

Valve Position, Math & P-1 Converters

Download Valve/Math pdf
Model Input Output Power
API 3200 G
Valve Positioner/Actuator
Specify input range
Factory configured
0-1 VDC to
0-100 VDC
0-10 mADC to
0-1 ADC

Potentiometer feedback

7 A (3.5 A inductive) SPDT
relay with nNeutral contact position
Hot-swappable plug-In design
LoopTracker LED for input
Relay LED
Manual open/close
Uses API-011 11-pin socket
115 VAC powered
A230 option for 230 VAC power
D option for 9-30 VDC power (+$60)
API 3200 G M01

Valve Actuator/ Positioner/Controller

Voltage Feedback

Specify Input Range
Factory configured
0-1 VDC to
0-100 VDC
0-10 mADC to
0-1 ADC

1-5 V feedback or specify

7 A (3.5 A inductive) SPDT
relay with nNeutral contact position
Hot-swappable plug-In design
LoopTracker LED for input
Relay LED
Manual open/close
Uses API-011 11-pin socket
115 VAC powered
A230 option for 230 VAC power
D option for 9-30 VDC power (+$60)
API 3200 G M02

Valve Actuator/ Positioner/Controller

Current Feedback

Specify Input Range
Factory configured
0-1 VDC to
0-100 VDC
0-10 mADC to
0-1 ADC

4-20 mA feedback or specify

7 A (3.5 A inductive) SPDT
relay with nNeutral contact position
Hot-swappable plug-In design
LoopTracker LED for input
Relay LED
Manual open/close
Uses API-011 11-pin socket
115 VAC powered
A230 option for 230 VAC power
D option for 9-30 VDC power (+$60)
API 4400 G (A+B+C+D) / 4
API 4401 G
(A+B+C) / 3
API 4402 G
(A+B) / 2
API 4403 G
(A+B+CD) / 3
API 4404 G
(A+BCD) / 4
API 4405 G
(ABCD)
API 4406 G
(A+BC) / 2
API 4407 G
(ABC)
API 4408 G
(AB)

Up to 4 DC Voltage or
Current Inputs
Specify Ranges
Addition, Subtraction,
Averaging Versions
Fully Isolated
DC Voltage or Current
Specify Range
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
API 4440 G
DC to DC Transmitter,
Square Root Extraction

DC Voltage or Current
Specify Range
18V Loop Supply
Square Root Extraction
Full Isolated
DC Voltage or Current
 Square Root of Input
Specify Range
115 VAC Std.
Opt. 230 VAC
Opt. 9-30 VDC
DPG1000L3-15PSIG
Pressure to Current Converter
3.00 to 15.00 psig 4-20 mA Loop Powered
F4L3-15PSIG
Pressure to Current Converter,
NEMA 4X
3.00 to 15.00 psig 4-20 mA Loop Powered
F16L3-15PSIG
Programmable Pressure
to Current Converter
3.00 to 15.00 psig
Air Pressure
Other ranges available
Programmable
2-wire 4-20mA Loop-Powered
2-Wire Loop Powered
Output Test Button
±0.25% Accuracy
316SS Sensor
1 Year Warranty
F16LN3-15PSIG

Programmable
Pressure to Current Converter
NEMA 4X

3.00 to 15.00 psig
Air Pressure
Other ranges available
Programmable
2-wire 4-20mA Loop-Powered
NEMA 4X housing
2-Wire Loop Powered
Output Test Button
±0.25% Accuracy
316SS Sensor
1 Year Warranty