Speed Sensors - Power Source Pickups from Dynalco Controls

Power Source Pickups

When external power is not available (e.g. for hazardous environments), these pickups can power other instrumentation and controls.


M107

MAGNETIC PICKUP: power source, standard sensitivity, standard reach

This standard magnetic pickup can power other instruments. It has a standard sensitivity, standard reach (2.25 inches), and a 5/8-18 inch thread.



 

M163

MAGNETIC PICKUP: power source, blind end

This magnetic pickup can power other instruments. It has a standard sensitivity which makes it appropriate for higher speed (>500 rpm), larger gear (>2 inch diam) applications. It has a 3.062 inch housing and 3/4-20 thread.



 

M207

MAGNETIC PICKUP: power source, low impedance

This magnetic pickup can power other instruments. It has a low impedance which makes it good for mid-speed (300 to 500 rpm) applications. It also has a long reach (5.125 inches), a 3/4-16 thread and is CSA approved.

Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly. UL, CENELEC, and some CSA approved pickups may be used with any instrumentation.




M208

MAGNETIC PICKUP: power source, long reach

This magnetic pickup can power other instruments. It has a high sensitivity which makes it good for low speed (<300 rpm), larger gear (>2 inch diam.) applications. It has a long reach (5.125 inches), a 3/4-16 thread and is CSA approved.

Most CSA-certified pickups retain that approval only when used as part of a specific certified system or assembly. UL, CENELEC, and some CSA approved pickups may be used with any instrumentation.