Continuous monitoring of switchgear spots problems before they happen!
Exertherm is a system of continuous thermal monitoring for electrical switch gear. Small, low cost, accurate, non contact, infrared sensors are fitted where they can directly monitor key components, even inside enclosures.
These sensors which require no external power measure the target temperature in relation to the surrounding ambient with the signal indicating the °C rise on ambient, so avoiding inaccuracies due to weather conditions, working environment etc.
Each sensor has individual, two stage alarms. The signal is fed back to eight channel data cards, which provide signal conditioning, thus insuring accurate and reliable readings. The cards are daisy chain connected and signals sent to a remote PC with easy read screen.
Information stored can be easily accessed to provide reliable trend analysis. Spotting likely failures before they happen.
The system can be connected to existing building management systems and fitted to new projects or fitted retrospectively.
- CONTINUOUS THERMAL MONITORING
- DETECTS POWER FAILURES BEFORE THEY OCCUR
- SMALL, LOW COST SENSORS
- NO EXTERNAL POWER
- TARGET TEMP. MEASURED IN RELATION TO AMBIENT
- TWO ALARM LEVELS
- DATA LOGGING FOR ANALYSIS
- CONNECTS TO BMS
- NEW OR RETRO FIT
Exergen Exertherm Infrared Temperature System
|E-Series Microscanner Models for portable spot checking of Switchgear
Multi-colured bargraph display and audible alarm for quick indication of hot spots. 50:1 field of view. Measure up to 12 feet away!
( Shown without laser sight option)
||Microscanner Super E
Same as the "E" above but with 200:1 field of view. Measure up to 50 feet away!
( Shown with laser sight option)