Signal Conditioners Series MSC From Love Controls

The Series MSC Signal Conditioners provide maximum accuracy with minimal cost. Built-in microprocessor digitally scales, amplifies, linearizes and isolates thermocouple, RTD, current, voltage, frequency or potentiometer analog input signals. Units offer 16-bit input resolution with 0.05% full scale accuracy. Eliminate ground loops with 1500 VAC isolation. Two LEDs, one red and one green, located on the front face of the enclosure provide visual indication of operation. Additional features include short circuit, reverse power protection, digital calibration and cold junction compensation.

Installation is a snap with the DIN rail mountable enclosure. Units are factory set to support a specific analog input and output, however, can be easily reconfigured to suit your application with the user-friendly Windows® Configuration software and cable (sold separately).

Also available is the SCC-4W DIN Rail Mount power supply and SCC-L1 Loop Isolator. Model SCC-4W is designed specifically to provide 24 VDC power for the SCC modules. Model SCC-L1 accepts a 4 to 20 mA signal and provides an isolated 4 to 20 mA signal output.

SPECIFICATIONS

Isolation: 1500 VAC 3-way: C, V, TC; 2-way: RTD, POT, FRQ, LI.
Input Protection: 220 VAC continuous.
Input Impedance: 1G ohm (mV/TC); >55K ohm (Voltage); 82 ohm (Current).
Output Impedance: >10M ohm (Current); ~ 0 ohm (Voltage).
Output Load: ≤600 ohm (Current); ≤4K ohm (±10 Volts); ≤2K ohm (±5 Volts).
Power Requirements:
15-32 VDC @ 25-45 mA.
Over Voltage: 240 Vrms continuous.
Accuracy:
0.05% Full Scale (includes linearity, repeatability and calibration errors).
Cold Junction Compensation: ±0.2°C (-15 to 55°C) for all T/C.
Resolution: 16-bit (input); 13-bit (output).
Drift:
0.01% full scale per °C.
Ambient Operating Temperature: -40 to 167°F (-40 to 75°C).
Storage Temperature: -49 to 185°F (-45 to 85°C); 0-95% RH, non-condensing.
Mounting: DIN rail (32 mm-G and 35 mm-H).
Connections: Socketed screw terminals for 14-22 AWG.
Response Time: 150 ms @ 60 Hz, typical.
Housing Material: Polyamide.
Weight:
1.4 oz (40 g).
Agency Approvals: CE, CSA, FM, cUL, UL.

Catalogue