Control Output Devices from Love Controls

Solid State Relays, SSR Monitors, Mercury Displacement Contactors and Power Controls from Love Controls, we have the product to meet your requirements.


Solid State Relays, SSR Monitors, Mercury Displacement Contactors and Power Controls
Series LTP Single & Three Phase Solid State Relays
Love Controls LTP Series Solid State Relays allow easy control of most resistive and some inductive loads. Available in zero-crossover or phase angle fired versions, these compact solid state relays fit in many applications.
Series LTT SSR Monitor
Love Controls LTT Series SSR Monitors allow easy monitoring of the operation of your SSR switches. This handy device compares the input status with the output status. An alarm operates a relay contact to tell you if the load circuit has opened or if the SSR has shorted.
Series 2481 Mercury Displacement Contactors
The Mercury 2481 Series Displacement Contactors switch high current loads quietly and reliably. The mercury-to-metal contact arrangement reduces noise and overheating, allows rapid cycling rates up to 20 cycles per minute, and maintains quiet operation. The non-magnetic, stainless steel contact tube is filled with pressurized gas to minimize arc erosion, lengthen the life of the contactor, and insure reliability.
Series 1020 and 3020 Single or Three Phase Power Controls
The Love Controls 1020 Series Single Phase and 3020 Series Three Phase Power Controls offer a solid state option for controlling resistive loads. Standard 4 to 20 mA input signal can provide zero-crossover firing or phase angle firing to your load. Zero-crossover firing is best for resistive loads, offering good control and reduced voltage transients and FRI. Cycle time is easily adjustable from one to ten seconds.
Series 1024 and 1032 Single Phase Power Controls
The Love Controls 1025 and 1032 Series Power Controls offer a solid state option for controlling loads. Standard 4 to 20 mA input signal can provide phase angle firing with or without current limiting to your load.
Series 1029 Single Phase Power Controls
The Love Controls 1029 Series Power Controls offer ease of use and application in a high performance, easy to install package. Standard 4 to 20 mA input signal can provide phase angle firing with current limiting to your load. Phase angle firing is best suited to inductive loads and special types of loads such as quartz heaters or tungsten loads.
Series 3027 and 3629 Three Phase SSR Power Controls
The Love Controls 3027 and 3629 Series Power Controls offer a solid state option for controlling loads. Standard 4 to 20 mA input signal can provide zero-crossover firing or phase angle firing to your load. The 3027 zero-crossover firing power control is best for resistive loads, offering good control and reduced voltage transients and RFI.