The Acuvim L Series measures true-RMS electrical parameters, bidirectional energy, demand and time-of-use data. CL, EL and KL models provide different metering and power-quality capabilities. Panel and DIN-rail mounting options, selectable current inputs and optional communications and I/O modules support a range of energy-monitoring installations.

Acuvim L Series Power and Energy Meters — Datasheet Acuvim L Series Power and Energy Meters — Instruction Manual Acuvim L Series Power and Energy Meters

Select & Configure Model

Base Model #	Power system	Voltage	Current	Power Supply	Output	Add to Cart / Configure Part #

Acuvim-	1PH / 3PH	480 VAC L-N; 828 VAC L-L	5A/1A or mV/Rogowski	P1V4: 100-415 VAC / 100-300 VDC; P2V4: 20-60 VDC	Optional digital / analog / relay modules	Configurator

Accuracy:

Model dependent; up to ANSI C12.20 Class 0.2 energy accuracy

Current:

5A/1A or 333 mV/Rogowski, by configuration

Communication interface:

Modbus RTU; optional communications modules and model-dependent protocols

Operating Temperature:

-25 to +70°C

Input:

480 VAC L-N; 828 VAC L-L nominal

Power Supply:

P1V4: 100-415 VAC / 100-300 VDC; P2V4: 20-60 VDC

Output(s):

Optional digital, analog and relay I/O modules

Storage Temperature:

-40 to +85°C

Current ordering uses CL, EL or KL model codes and P1V4/P2V4 power supplies. The mV current input supports 333 mV and Rogowski sensing. Optional external communication and I/O modules are ordered separately; maximum three modules total, communications module first, and no more than two identical I/O modules with different logic numbers.

Availability: Inquire. Confirm the selected configuration and delivery with Mod-Tronic.

Earlier AL, BL and DL models are still mentioned in supplier support materials, but are absent from the current ordering sheet. Confirm availability before specifying or ordering a legacy model.