API 4001 G L RTD Temperature Transmitters
RTD to DC Isolated Transmitters
The API 4001 G L accepts an RTD temperature input and provides an optically isolated and linearized DC voltage or current output. The sensor type, temperature range and output range are factory set and can be specified as required. This provides an economical solution when a temperature sensor signal must be converted to a DC signal. The temperature input is linearized and amplified, and then passed through an optocoupler to the output stage. Full 3-way isolation (input, output, power) make this module useful for ground loop elimination, common mode signal rejection, and noise pickup reduction.
- RTD linearization
- Hot-swappable plug-in design
- I/O LoopTracker LEDs
- Output test button
- Full I/O/power isolation
- 2-wire or 3-wire RTD
- Lead wire compensation for 3-wire
- Uses API-008 8-pin socket
- 115 VAC powered
- A230 option for 230 VAC
- P option for 85-265 VAC, 60-300 VDC power
- D option for 9-30 VDC power
Select & Configure Model
Base Model # | Power | Transmitter Type | Approvals | Ambient Operating Temperature | Sensor Input Type | Normally In Stock | Configure Part # |
API 4001 G L | 115 VAC | Plug-in | UL Recognized - USA & Canada | –10°C to 60°C (14 to 140°F) | RTD | Inquire | |
API 4001 G L A230 | 230 VAC | Plug-in | UL Recognized - USA & Canada | –10°C to 60°C (14 to 140°F) | RTD | Inquire | |
API 4001 G L D | 9-30 VDC | Plug-in | UL Recognized - USA & Canada | –10°C to 60°C (14 to 140°F) | RTD | Inquire | |
API 4001 G L P | 85-265 VAC, 60-300 VDC | Plug-in | UL Recognized - USA & Canada | –10°C to 60°C (14 to 140°F) | RTD | Inquire | |
API 4001 G SA-B | 115 VAC | Plug-in | N/A | –10°C to 60°C (14 to 140°F) | RTD | Inquire | |
API 4001 G A230 SA-B | 230 VAC | Plug-in | N/A | –10°C to 60°C (14 to 140°F) | RTD | Inquire | |
API 4001 G D SA-B | 9-30 VDC | Plug-in | N/A | –10°C to 60°C (14 to 140°F) | RTD | Inquire | |
API 4001 G P SA-B | 85-265 VAC, 60-300 VDC | Plug-in | N/A | –10°C to 60°C (14 to 140°F) | RTD | Inquire |