Request a Quote

* Required fields










Message / Order details:
Sending...

1-800-794-5883
Translate Mod Tronic Instruments Ltd.
Select Language


Select category

Reduced Tip / Tapered Thermowells


MINCO Reduced Tip / Tapered  Thermowells​ are best for moderate temperatures and pressures.

Protect probes from pressure, flow, and corrosive fluids. Thermowells on this page are machined from solid bar stock. Specify reduced tip style for fast response, tapered style for maximum rigidity in high flow conditions. Immerse the thermowell at least 2.5" (65 mm) for accurate readings. The well should extend beyond the center of the fluid stream without touching the opposite wall. Installation in an elbow or tee may be necessary for sufficient immersion in small pipes. Spring-loaded probe installation is recommended, using either spring-loaded holders or bayonet-mount probes. 0.250" diameter probes provide the best fit. For fastest time response, Mod-Tronic can furnish thermowells with heat sink compound in the tip. This eliminates the air gap between the probe and inside wall of the well and can reduce time constant by as much as 50%. Order AC101750. Use Configurator button below to select and configure a part number ⇩


Select & Configure Model
Base Model #Reduce TypeBody MaterialTemperature RangeProcess ThreadProbe DiameterPressureNormally
In Stock
Add to Cart /
Configure Part #
 
TW239UTip304 stainless steelUpto 900°C (1650°F)1/2" - 14 NPT0.625" (16 mm)1650 psi (114 bar) to 7000 psi (483 bar)YesConfigurator
TW228UTip304 stainless steelUpto 900°C (1650°F)3/4" - 14 NPT0.750" (19 mm1650 psi (114 bar) to 7000 psi (483 bar)YesConfigurator
TW238UTip304 stainless steelUpto 900°C (1650°F)1 - 11 1/20.875" (22 mm)1650 psi (114 bar) to 7000 psi (483 bar)InquireConfigurator
TW222UTip316 stainless steel Upto 900°C (1650°F)1/2" - 14 NPT0.625" (16 mm)2500 psi (172 bar) to 7000 psi (483 bar)YesConfigurator
TW248UTip316 stainless steel Upto 900°C (1650°F)3/4" - 14 NPT0.750" (19 mm)2500 psi (172 bar) to 7000 psi (483 bar)YesConfigurator
TW234UTip316 stainless steel Upto 900°C (1650°F)1 - 11 1/20.875" (22 mm)2500 psi (172 bar) to 7000 psi (483 bar)InquireConfigurator
TW1204UTipMonelUpto 538°C (1000°F)1/2" - 14 NPT0.625" (16 mm)1500 psi (103 bar) to 6500 psi (448 bar)InquireConfigurator
TW447UTipMonelUpto 538°C (1000°F)3/4" - 14 NPT0.750" (19 mm)1500 psi (103 bar) to 6500 psi (448 bar)InquireConfigurator
TW1231UTipMonelUpto 538°C (1000°F)1 - 11 1/20.875" (22 mm)1500 psi (103 bar) to 6500 psi (448 bar)InquireConfigurator
TW477UTapered304 stainless steel Upto 900°C (1650°F)3/4" - 14 NPT0.875" (22 mm)1650 psi (114 bar) to 7000 psi (483 bar)InquireConfigurator
TW252UTapered304 stainless steel Upto 900°C (1650°F)1 - 11 1/21.06" (27 mm)1650 psi (114 bar) to 7000 psi (483 bar)InquireConfigurator
TW1218UTapered316 stainless steel Upto 900°C (1650°F)3/4" - 14 NPT0.875" (22 mm)2500 psi (172 bar) to 7000 psi (483 bar)InquireConfigurator
TW1237UTapered316 stainless steel Upto 900°C (1650°F)1 - 11 1/21.06" (27 mm)2500 psi (172 bar) to 7000 psi (483 bar)InquireConfigurator
MTW1208UStraight303 stainless steel Upto 871°C (1600°F)G 1/2 ISO 228/1 parallel0.250" (6.4 mm)493 psi (34 bar) to 2755 psi (190 bar)InquireConfigurator

Mod Tronic Instruments Limited
1 Delta Park Blvd #12
Brampton, ON L6T 5G1
Phone: 905-457-6322 or 1-800-794-5883
Fax: 905-457-4716 or 1-800-830-7122
Brampton
Halifax
Regina
Edmonton
905-457-6322
902-422-0978
306-359-1476
780-459-2690
Montreal
Winnipeg
Calgary
Vancouver
514-848-7205
204-895-2038
403-236-2909
604-224-9547